GENERALAIRE 1040 Parts, Filters

Your model GENERALAIRE 1040 uses the 7002 GeneralAire 990-13 Evaporator Filter Pad - 7002. The Generlaire 900-13 replacement humidifier pad is also known as the General Aire 7002. The 900-13 is manufactured for use in your GeneralAire series humidifier. This GeneralAire evaporator pad will draw water into it, then release fresh evaporatio

Your model GENERALAIRE 1040 uses the 7030 GeneralAire 1040-7 Humidifier Pad Channel. The GeneralAire 1040-7 Humidifier Pad Channel is an internal replacement component for all GeneralAir 1040 Series humidifiers. It is important to note that 2 humidifier pad channels are required for each humidifier system.

Your model GENERALAIRE 1040 uses the 6001 GeneralAire 975-3 Humidifier Orifice Nut. The GeneralAire 975-3 Humidifier Orifice Nut is a replacement orifice nut for the GeneralAire 1040, 1042, and 1137 Legacy Series Humidifiers. The 975-3 orifice nut attaches to the P117 orifice washer and is a crucial part of your pump motor. The 600

Your model GENERALAIRE 1040 uses the 7005 GeneralAire 990-17 Humidifier Strainer. The GeneralAir 990-17 Humidifier Strainer - 7005 is an inner component of the Orifice and Strainer Assembly on General Air Legacy 709 Series, 1040 Series, 1042 Series, 1099 Series, 1137 Series Humidifier Systems.

Your model GENERALAIRE 1040 uses the 7009 GeneralAire 990-37-75 Orifice Strainer Assembly Part 7009. The GeneralAire 990-37-75 Orifice Strainer Assembly fits the following models of humdifiers: GeneralAire 709, GeneralAire 1040, GeneralAire 1042, GeneralAire 1099, GeneralAire 1137.

Your model GENERALAIRE 1040 uses the 7013 GeneralAire 990-52 Solenoid Valve Assembly - 115V. The GeneralAire 990-52 Solenoid Valve Assembly is a replacement solenoid valve assembly for the GeneralAire 1040 and 1042 Legacy Series Humidifiers. The 990-52 solenoid valve assembly is a crucial internal component of your Legacy humidifier

Your model GENERALAIRE 1040 uses the 7014 7014 - GeneralAire 990-53 Solenoid Valve Assembly for 1042, 1137. The GeneralAire 990-53, Part Number 7014 is the correct replacement for the following humidifiers: 709, 1040 and 1042, 1137 Humidifiers.

Your model GENERALAIRE 1040 uses the 7043 GeneralAire 1099-9 Humidifier Thumb Nut. The General Air 1099-9 Humidifier Thumb Nut is a replacement part for GeneralAir Legacy 709, 1040, 1042, 1099, and 1137 Series Humidifiers General Aire Drum 747 Humidifier Series and General Air AC-2 & AC-3 Air Cleaners.

Your model GENERALAIRE 1040 uses the 7158 GeneralAire P103104111 Connector Fittings Kit. The GeneralAire P103104111 Connector Fittings Kit fits the following models of humidifiers: GeneralAire 1040 GeneralAire 1042 This GeneralAire 1040 series humidifier part contains 3 parts, the connector and its fittings. The GeneralAire P1031

Your model GENERALAIRE 1040 uses the 6000 GeneralAire 975 Humidifier Pump Kit - 6000. The GeneralAire 975 Humidifier Pump Kit is used for drain type humidifiers to eliminate drain requirements. This General Aire pump kit for General Air humidifiers includes pump, hose, float valve assembly and water pump.

Your model GENERALAIRE 1040 uses the 7119 GeneralAire 727-32 Humidifier Float Block. The GeneralAire 727-32 Humidifier Float Block is a replacement float for the GeneralAire Legacy Humidifier Models 1040, 1042, and 1137. The 727-32 float block houses the 975-45 reservoir and baffle in your Legacy humidifier. The GeneralAire 7119 is

Your model GENERALAIRE 1040 uses the 8022 GeneralAire 800-UST Self-Tap Saddle Valve Kit. The GeneralAire 800-UST Self-Tap Saddle Valve Kit is the replacement part 8022 for GeneralAir Legacy 709 Series, 1040 Series, 1042 Series, 1099 Series, and 1137 Series Humidifiers, and 747 Series, 65, 81 and 800 Drum Humidifiers.

Your model GENERALAIRE 1040 uses the 7031 GeneralAire 1040-12 Humidifier Distributor Tube. The GeneralAire 1040-12 Humidifier Distributor Tube fits the following models of humidifiers: GeneralAire 1040 GeneralAire 1040L GeneralAire 1040LH GeneralAire 1040R This GeneralAire 1040 humidifier part is the humidifier's distributor tube

Your model GENERALAIRE 1040 uses the 6015 GeneralAire 975-33 Humidifier Pump Motor. The GeneralAire 975-33 Humidifier Pump Motor fits the following models of humidifiers: GeneralAire 709 GeneralAire 1009 GeneralAire 1040 GeneralAire 1042 GeneralAire 1137 This GeneralAire 709 series humidifier part is the humidifier's pump

Your model GENERALAIRE 1040 uses the 6005 GeneralAire 975-6 Humidifier Valve Shield. The GeneralAire 975-6 Humidifier Valve Shield is a replacement valve shield for the GeneralAire Legacy Drum Model 65 and GeneralAire 1040 Legacy Series Humidifiers. The 975-6 valve shield is part of the 975-10 float valve assembly and attaches direc

Your model GENERALAIRE 1040 uses the 6004 GeneralAire 975-1 Humidifier Valve Seat. The GeneralAire 975-1 Humidifier Valve Seat a replacement valve seat for the GeneralAire Legacy Drum Humidifier Model 65 and the 1040 Legacy Series Humidifiers. The 975-1 valve seat attaches onto the 81-21 float valve assembly and fits beneath the 9

Your model GENERALAIRE 1040 uses the 6026 GeneralAire P118 Humidifier Cotter Pin. The General Air P118 Humidifier Cotter Pin is the is an inner component of the Pump, Motor & Lid Assembly for General Aire Legacy 1040 Series, 1042 Series, 1099 Series, 1137 Series and 709 Series Humidifiers.

Your model GENERALAIRE 1040 uses the 6036 GeneralAire P117 Humidifier Orifice Washer. The GeneralAire P117 Humidifier Orifice Washer fits the following models of humdifiers: GeneralAire 1040 GeneralAire 1042 GeneralAire 1099 This GeneralAire 1040 series humidifier part is the washer for the humidifier orifice. The GeneralAire

Your model GENERALAIRE 1040 uses the 7122 GeneralAire 727-24 Humidifier Orifice Fitting. The GeneralAire 727-24 Humidifier Orifice Fitting is a replacement orifice fitting for the GeneralAire Legacy Humidifier models 65, 1040, 1042, and 1099. The 727-24 orifice fitting is a crucial internal component of your Legacy humidifier model that